Home » OSHA 1910.37 and 1910.38 Compliance Guide

Compliance guide

OSHA 1910.37 and 1910.38 Compliance Guide

Use this OSHA guide to connect exit routes, emergency action planning, signage visibility, lighting support, and workplace documentation.

Read full guide Fire codes hub State fire code map Learning center Request a quote
Code note: this page supports product research and planning. Final acceptance depends on the adopted code edition, project documents, local amendments, and the authority having jurisdiction.

Product paths to compare

Use these links to move from the compliance question into products with the right listing, rating, mounting, and documentation.

Exit signs

For marked exit doors, directional egress, visibility, arrows, face count, and local color notes.

Shop exit signs

Emergency lights

For backup illumination along exit access, stairs, corridors, and other egress paths.

Shop emergency lights

Combo units

For doorways and compact layouts that need exit signage with integrated emergency heads.

Shop combo units

State and local review

Use the state map after the national code path is clear, then confirm the local AHJ details.

Open state map

Compliance planning checks

These checks keep the page practical while the full original guide content remains available below.

1 Code scope

Confirm which adopted code, local amendment, or project specification controls the job.

2 Product listing

Match UL, location rating, voltage, mounting, runtime, housing, and fixture family.

3 Documentation

Keep cut sheets, listing information, installation instructions, and inspection notes together.

4 Local review

Verify final acceptance with the authority having jurisdiction and project team.

Full OSHA exit route guide details

The original page content is retained below, with images and tables constrained so the guide stays readable.

Use this OSHA guide to connect workplace exit routes, emergency action planning, signage visibility, lighting support, and documentation.

Product paths to compare

Project question Product path
Need exit signs? Exit signs
Need emergency lights? Emergency lights
Need combo units? Combo units
Need request facility project help? Request facility project help

Planning checkpoints

  • Confirm exit routes remain visible, marked, illuminated, and unobstructed.
  • Coordinate product selection with emergency action planning, inspection responsibilities, and facility maintenance.
  • Keep testing and replacement records available for workplace safety review.

Official references

Code note: This guide is a purchasing and planning aid, not a code determination. Confirm final requirements with the authority having jurisdiction, adopted code edition, engineer of record, and project documents.

Related guide paths

Move between the related compliance pages without leaving the guide system.

Fire codes hub

Use the main hub for state details, standards, and product paths.

Open hub

Life safety and power

Use these pages when the question starts with egress, electrical circuits, maintenance, or emergency power.

IFC NFPA 101 NEC / NFPA 70 NFPA 110