This ballast is designed to provide the highest quality of emergency lighting and illumination to florescent fixtures. If you have florescent fixtures where lighting should be on at all times, or even if you would like to have backup illumination from you fixtures in-case of power outages, this ballast series is for you. However you must make sure that your current fluorescent fixture meets the requirements of this emergency ballast.
This ballast comes with a very durable steel housing. The steel housing allows the components of the of the ballast to be fully protected. That includes a nickel cadmium batter, a charger and an electronic circuit.
This ballast comes with a battery, charger and electronic circuit in-case of emergency. All of these components are necessary for the emergency ballast to be UL listed. We only provide the highest quality products at Emergency Lights Co.
This emergency ballast works at 3000 lumens for 1 lamp at 2"-8" single bi-pin T8-T12 linear fluorescent; Or 2 lamps between the ranges of 2"-4" double, bi-pin T8-T12 linear fluorescent fluorescent.
Fluorescent emergency backup ballasts provide a minimum 90-minutes of emergency power to the type of lamp it is designed to provide power for. This emergency backup ballast will provide 3-5 years of reliable emergency power. The recharge time for the battery is 24 hours and the max working temperature for the battery is 122º F.
The durability of this ballast is one of the best around. It is suitable for new builds or retrofit installation. With a Steel housing, it is protective against many elements.
The appeal of this ballast is in its ability to be such a small unit but so powerful at the same time. With its protective housing and components tucked neatly inside, visually the presents of the ballast is unknown.
This ballast is suitable for indoor, cold temperature and damp locations. It is also suitable for new build and retrofit installations.